Soft Starter For Asynchronous Motor, Altistart 01, ATS01, 12A, 380…415V, 5.5kw
SKU: ATS01N212QN
Specifications
CATEGORY:
PRODUCT BRAND:
PRODUCT NAME:
Soft Starter For Asynchronous Motor, Altistart 01, ATS01, 12A, 380…415V, 5.5kw
PRODUCT NUMBER:
ATS01N212QN
AVAILABILITY:
On-Demand
DESCRIPTION
Description
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 12A. This Altistart 01 can be used for a motor rated power up to 3kW or 3hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
Specifications
Range of product | Altistart 01 |
---|---|
Product or component type | Soft starter |
Product destination | Asynchronous motors |
Product specific application | Simple machine |
device short name | ATS01 |
Network number of phases | 3 phases |
[Us] rated supply voltage | 380…415 V – 10…10 % |
Motor power kW | 5.5 kW, 3 phases at 380…415 V |
IcL starter rating | 12 A |
Utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
Current consumption | 60 A at nominal load |
Type of start | Start with voltage ramp |
Power dissipation in W | 4 W at full load and at end of starting 124 W in transient state |
Assembly style | With heat sink |
---|---|
Function available | Integrated bypass |
Supply voltage limits | 342…456 V |
Supply frequency | 50…60 Hz – 5…5 % |
Network frequency | 47.5…63 Hz |
Output voltage | <= power supply voltage |
[Uc] control circuit voltage | Built into the starter |
Starting time | Adjustable from 1 to 10 s |
Deceleration time symb | Adjustable from 1 to 10 s |
Starting torque | 30…80 % of starting torque of motor connected directly on the line supply |
Discrete input type | Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
Discrete input voltage | 24…40 V |
Discrete input logic | Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA |
Discrete output current | 2 A DC-13 3 A AC-15 |
Discrete output type | Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO |
Discrete output voltage | 24 V (voltage limits: 6…30 V) open collector logic |
Minimum switching current | 10 mA at 6 V DC for relay outputs |
Maximum switching current | Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
Display type | 1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached |
Tightening torque | 1.9…2.5 N.m 0.5 N.m |
Electrical connection | 4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit 4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit |
marking | CE |
Operating position | Vertical +/- 10 degree |
Height | 124 mm |
Width | 45 mm |
Depth | 131 mm |
Product weight | 0.42 kg |
Compatibility code | ATS01N2 |
Motor power range AC-3 | 4…6 kW at 380…440 V 3 phases |
Motor starter type | Soft starter |
Electromagnetic compatibility | Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 Harmonics conforming to IEC 1000-3-2 Harmonics conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
---|---|
Standards | EN/IEC 60947-4-2 |
Product certifications | B44.1-96/ASME A17.5 for starter wired to the motor delta terminal CCC UL GOST CSA C-Tick |
IP degree of protection | IP20 |
Pollution degree | 2 conforming to EN/IEC 60947-4-2 |
Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
Relative humidity | 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
Ambient air temperature for operation | -10…40 °C (without derating) 40…50 °C (with current derating of 2 % per °C) |
Ambient air temperature for storage | -25…70 °C conforming to EN/IEC 60947-4-2 |
Operating altitude | <= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m |
Unit Type of Package 1 | PCE |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Height | 5.500 cm |
Package 1 Width | 15.200 cm |
Package 1 Length | 17.500 cm |
Package 1 Weight | 534.000 g |
Unit Type of Package 2 | S03 |
Number of Units in Package 2 | 14 |
Package 2 Height | 30.000 cm |
Package 2 Width | 30.000 cm |
Package 2 Length | 40.000 cm |
Package 2 Weight | 7.985 kg |
Unit Type of Package 3 | P06 |
Number of Units in Package 3 | 112 |
Package 3 Height | 75.000 cm |
Package 3 Width | 60.000 cm |
Package 3 Length | 80.000 cm |
Package 3 Weight | 74.012 kg |
Warranty | 18 months |
---|
Sustainability
arrow2_down
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
arrow2_left
Well-being performance
REACh free of SVHC
information_stroke
notification_ok
Toxic heavy metal free
information_stroke
notification_ok
Mercury free
information_stroke
notification_ok
RoHS exemption information
information_stroke
REACh Regulation
information_stroke
EU RoHS Directive
information_stroke
Pro-active compliance (Product out of EU RoHS legal scope)
China RoHS Regulation
information_stroke
WEEE
information_stroke
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Dimensions Drawings
arrow2_down
Dimensions
Mounting on Symetrical (35 mm) Rail
Screw Fixing
(1)
Retractable fixings
Connections and Schema
arrow2_down
Example of Manual Control
A1 :
Soft start/soft stop unit
(1)
For type 2 coordination
Q1 :
Motor circuit-breaker
F3 :
3 fast-acting fuses
Technical Description
arrow2_down
Function Diagram
2-wire Control with Deceleration
Us :
Power supply voltage
LED 1 :
Green LED
LI2 :
Logic input
R1 :
Relay output
LO1 :
Logic output
LED 2 :
Yellow LED
3-wire Control with Deceleration
Us :
Power supply voltage
LED 1 :
Green LED
LI2, LI1 :
Logic inputs
R1 :
Relay output
LO1 :
Logic output
Um :
Motor voltage
LED 2 :
Yellow LED
Item reviews
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.