MINI MCR-SL-R-UI – Resistance/potiposition transducer

SKU: MINI MCR-SL-R-UI

Specifications

CATEGORY: ​
PRODUCT BRAND: ​
PRODUCT NAME: ​
MINI MCR-SL-R-UI – Resistance/potiposition transducer
PRODUCT NUMBER:
MINI MCR-SL-R-UI
AVAILABILITY: ​
On-Demand
Message Now

DESCRIPTION

Product Details

The narrow 6.2 mm MINI MCR-SL-R-UI… potiposition transducer converts potentiometer positions into a standard analog signal on a percentage basis. If the potentiometer range cannot be utilized to the full, an externally accessible slide switch is used to set the upper and lower potentiometer final values. The output signal between 0% and 100% is based on this set final value.

The DIP switches, which can be accessed on the side of the housing, are used to configure the following parameters:
– Output signal
– Automatic potentiometer detection
– Wire-break detection slider
– Type of error evaluation
Power (19.2 V DC to 30 V DC) can either be supplied via the connection terminal blocks of the modules or in conjunction with the DIN rail connector.

Technical Data
Utilization restriction
EMC noteEMC: class A product, see manufacturer’s declaration in the download area

Product properties
Product typePotiposition transducer
Product familyMINI Analog
No. of channels1
ConfigurationDIP switches
Insulation characteristics
Overvoltage categoryII
Pollution degree2

System properties
Functionality
ConfigurationDIP switches

Electrical properties
No. of channels1
Maximum power dissipation for nominal condition235.5 mW
Step response (0–99%)< 30 ms
Maximum temperature coefficient< 0.02 %/K
Temperature coefficient, typical< 0.02 %/K
Maximum transmission error< 0.2 %
Electrical isolation Input/output/power supply
Rated insulation voltage30 V AC
50 V DC
Test voltage1.5 kV AC (50 Hz, 60 s)
InsulationBasic insulation in accordance with IEC/EN 61010
Supply
Nominal supply voltage24 V DC
Supply voltage range19.2 V DC … 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption< 25 mA (at 24 V DC)
Power consumption< 500 mW

Input data
Signal: Resistance
Number of inputs1
Resistance range100 Ω … 100 kΩ
Reference voltage source< 3.6 V

Output data
Signal: Voltage/current
Number of outputs1
Voltage output signal0 V … 5 V
1 V … 5 V
0 V … 10 V
10 V … 0 V
Max. voltage output signal12.5 V
Non-load voltage 12.5 V
Current output signal0 mA … 20 mA
4 mA … 20 mA
20 mA … 0 mA
20 mA … 4 mA
Max. current output signal23 mA
Short-circuit current 10 mA
Load/output load voltage output> 10 kΩ
Load/output load current output< 500 Ω (20 mA)
Ripple< 20 mVPP (500 Ω)
< 20 mVPP (10 kΩ)
Behavior in the event of a sensor error0 % … 105 % (configurable)

Connection data
Connection methodScrew connection
Stripping length12 mm
Screw threadM3
Conductor cross section rigid0.2 mm² … 2.5 mm²
Conductor cross section flexible0.2 mm² … 2.5 mm²
Conductor cross section AWG26 … 12

Signaling
Error indicationRed LED

Dimensions
Dimensional drawing
Width6.2 mm
Height93.1 mm
Depth101.2 mm

Material specifications
Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 – HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 – HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 – HL 2
Housing materialPBT

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-20 °C … 65 °C
Ambient temperature (storage/transport)-40 °C … 85 °C
Altitude≤ 2000 m
Permissible humidity (operation)5 % … 95 % (non-condensing)

Approvals
CE
CertificateCE-compliant
UKCA
CertificateUKCA-compliant
UL, USA/Canada
IdentificationUL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T4
Shipbuilding approval
CertificateDNV GL TAA000020N
DNV GL data
TemperatureB
HumidityB
VibrationB
EMCA
EnclosureRequired protection according to the Rules shall be provided upon installation on board

EMC data
Noise immunityEN 61000-6-2
NoteWhen being exposed to interference, there may be minimal deviations.
Electromagnetic compatibilityConformance with EMC directive
Noise emissionEN 61000-6-4
Electromagnetic HF field
DesignationElectromagnetic RF field
Standards/regulationsEN 61000-4-3
Typical deviation from the measuring range final value5 %
Fast transients (burst)
DesignationFast transients (burst)
Standards/regulationsEN 61000-4-4
Typical deviation from the measuring range final value5 %
Conducted interference
DesignationConducted interferences
Standards/regulationsEN 61000-4-6
Typical deviation from the measuring range final value5 %

Mounting
Mounting typeDIN rail mounting
Mounting positionany

Commercial Data
Item number2864095
Packing unit1 pc
Minimum order quantity1 pc
Sales KeyCK1232
Product KeyCK1232
Catalog PagePage 111 (C-7-2015)
GTIN4046356046442
Weight per Piece (including packing)98.2 g
Weight per Piece (excluding packing)73.17 g
Customs tariff number85437090
Country of originDE
PRODUCT CATALOG: ​

Item reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.